Umatshini wokwenza i-nitrogen yensimbi engenasici kwishishini lamayeza

Kutheni ukhetha i-Sihope kwiiMfuno zakho ze-PSA ze-Nitrogen Generator:

UKUTHEMBEKA / AMAVA

• Isitshixo sokwenza utyalo-mali kwizixhobo zesiVeliso seNitrojeni kukuqinisekisa ukuba uthenga kwinkampani ethembekileyo.ISihope inamawaka eenkqubo ezifakelweyo nezisebenza kwihlabathi liphela.
• I-Sihope inenye yeepotfoliyo ezinkulu zemveliso kwimarike enemodeli engaphezulu kwe-50 esemgangathweni onokukhetha kuyo, kunye nokusulungekiswa ukuya kuma-99.9995% kunye namazinga okuhamba ukuya kwi-2,030 scfm (3,200 Nm3/h)
• Umgangatho uqinisekiswa kwaye ugcinwe ngoyilo oluqinisekisiweyo lwe-ISO-9001 kunye nezixhobo zokwenza.

UKONGA NGEINDLEKO

• Ukongiwa kweendleko zama-50% ukuya kuma-300% xa kuthelekiswa nonikezelo lwelwelo oluninzi, idewar, kunye neesilinda zeNitrogen
• Unikezelo oluqhubekayo, alusoze luphele iNitrogen
• Akukho zivumelwano zinzima zokubonelela ngeentlawulo ezisoloko zinyuka

UKHUSELEKO

• Akukho miba yokhuseleko okanye yokuphatha ehambelana ne-bulky high pressure cylinders
• Isusa iingozi zolwelo lwe-cryogenic

Uqwalaselo lweNkqubo oluQhelekileyo

Inkcazo yeNkqubo

• I-Sihope inokubonelela ngoyilo olupheleleyo lwenkqubo yokujika, kuquka onke amacandelo enkqubo kunye nemizobo yoyilo.Amaqela ethu obugcisa asebenza ngokuthe ngqo nabathengi bethu ukucacisa kunye nokufaka iinkqubo kwiinkcukacha zomthengi wethu.USihope uneqela lenkonzo epheleleyo elungele 24/7 ukuphendula nawuphi na umbuzo onokuba nawo.

Iteknoloji

Isebenza njani inkqubo ye-Pressure Swing adsorption (PSA):

I-Sihope ® I-Nitrogen PSA Generator Systems isebenzisa umgaqo osisiseko wokudlula umoya phezu kwebhedi ye-adsorbent material eyinjineli, edibanisa ne-oxygen, ishiya umlambo ocebileyo wegesi ye-nitrogen ukuphuma.

Ukwahlula i-adsorption kufezekiswa ngala manyathelo enkqubo alandelayo:

• YONZA UKUCINEZWA KOMOYA KUNYE NE-CONDITIONING

I-inlet (i-ambient) yomoya ixinzelelwe yi-compressor yomoya, yomiswe ngesomisi somoya, kwaye ihluzwe, ngaphambi kokungena kwiinqanawa zenkqubo.

• UXINZELELO KUNYE NE-ADSORPTION

Umoya owenziwe ngaphambili kunye nokucoca umoya uqondiswe kwinqanawa egcwele iCarbon Molecular Sieve (CMS) apho i-oksijini ibhengezwa ngokukhethekileyo kwi-CMS pores.Oku kuvumela i-nitrogen egxininisiweyo, kunye nokuhlambuluka okuhlengahlengiswayo, (engaphantsi kwe-50 ppm O2) ukuba ihlale kumlambo wegesi kwaye iphume ngaphandle kwenqanawa.Ngaphambi kokuba umthamo opheleleyo we-adsorption we-CMS ufikeleleke, inkqubo yokwahlula iphazamisa ukuhamba kwe-inlet, kwaye itshintshela kwesinye isitya se-adsorber.

• UKWENZIWA

I-CMS egcwele i-oksijini ihlaziywa (i-adsorbed gases ikhutshwe) ngokucutha uxinzelelo, ngaphantsi kwesinyathelo sangaphambili se-adsorption.Oku kuphunyezwa ngenkqubo yokukhutshwa koxinzelelo olulula apho i-exhaust (inkunkuma) i-gas stream iphuma kwinqanawa, ngokuqhelekileyo nge-diffuser okanye i-silencer kwaye ibuyele kwi-atmosphere engqongileyo ekhuselekileyo.I-CMS ehlaziyiweyo iyahlaziywa kwaye ngoku ingasetyenziselwa ukuveliswa kwenitrogen.

• UKUJONGANA IMIZIMBA okanye UKUJONGA

I-Adsorption kunye ne-desorption kufuneka yenzeke ngokutshintshanayo ngexesha elilinganayo.Oku kuthetha ukuba ukuveliswa okuqhubekayo kwe-nitrogen kunokufumaneka ngokusebenzisa ii-adsorbers ezimbini;ngelixa enye i-adsorbing, enye ikwimo yokuhlaziya;kunye nokutshintshela emva naphambili, kubonelela ngokuhamba okuqhubekayo nokulawulwayo kwenitrogen.

• I-NITROGEN RECEIVER

Ukuhamba rhoqo kwemveliso yenitrogen kunye nokucoceka kuqinisekiswa yinqanawa edibeneyo ye-buffer egcina imveliso ye-nitrogen.Oku kunokuthi kulungiselelwe ukuhlanjululwa kwe-nitrogen ukuya kwi-99.9995% kunye noxinzelelo ukuya kwi-150 psig (10 bar).

• IMVELISO YENITROGEN

Imveliso yesiphumo ngumlambo oqhubekayo we-On Site eveliswayo, ukucoceka okuphezulu kwe-Nitrogen, ngexabiso eliphantsi kakhulu kwexabiso le-liquid okanye i-bottled gases.